Lintrac 70

logo_lintrac
70

Lintrac 70

ZF technology and Lindner Know-how

Lintrac combines the latest ZF continuously variable technology with a simple and practically-orientated operating concept from Lindner. The decades of experience from two companies is hereby unified in one efficient and compact vehicle. If you are looking for a high-performance tractor, which is also highly manoeuvrable; then you have found it here with Lindner.

At a glance

engine

Motor

PERKINS Syncro 904J-E36TA
74.4 kW (101 hp)
4-cyl. / 3,600 cm³
Turbo diesel engine with particulate filter and SCR
Exhaust gas level 5
transmission

Transmission

TMT09 - ZF stepless transmission
40 km/h
Lindner LDrive light
Optional: stationary PTO
universalJointShaft

Power take off

power shift rear PTO
430 / 540 / 750 / 1,000 rpm
hydraulics

Hydraulics

50 l/min
Separate oil balance
dimensions

Dimensions

Width 2084mm
Height 2453mm
Wheelbase 2304 mm
  • engine

    Motor

    PERKINS Syncro 904J-E36TA
    74.4 kW (101 hp)
    4-cyl. / 3,600 cm³
    Turbo diesel engine with particulate filter and SCR
    Exhaust gas level 5
  • transmission

    Transmission

    TMT09 - ZF stepless transmission
    40 km/h
    Lindner LDrive light
    Optional: stationary PTO
  • universalJointShaft

    Power take off

    power shift rear PTO
    430 / 540 / 750 / 1,000 rpm
  • hydraulics

    Hydraulics

    50 l/min
    Separate oil balance
  • dimensions

    Dimensions

    Width 2084mm
    Height 2453mm
    Wheelbase 2304 mm

Cabin

Cabin

The panoramic comfort cabin is a comfortable workplace with perfect all-round visibility.

The panoramic comfort cabin ensures an optimal overview on all sides. Fatigue-free work is achieved through a pleasant working atmosphere, a comfortable seat and logically placed controls. Especially in dangerous situations, it is important to find switches and levers quickly in order to react correctly.

Suspended cab with perfect all-round visibility

Suspended cab with perfect all-round visibility

The panoramic comfort cabin ensures an optimal overview on all sides. Fatigue-free work is achieved through a pleasant working atmosphere, a comfortable seat and logically placed controls.

Three clear operating areas

Three clear operating areas

The controls are reduced to the essentials and divided into the dashboard, LDrive armrest light and side control console. With the LDrive rotary control, the driving speed can be accelerated or braked continuously by turning. The different driving modes are selected using quick selection buttons.

Comfort for driver and passenger

Comfort for driver and passenger

Lindner LDrive
Lindner LDrive

Get in and drive!

Get in and drive: Every driver is a professional with the simple control dial. It is easy to drive the Lintrac: Start the engine, pick the direction, step on the gas and steer. Using the LDrive control dial on the armrest makes for very efficient work.

If the LDrive is activated, rotating the dial sets the speed of travel in a dynamic and infinitely variable manner. Rapid selection buttons are provided for all-wheel, differential, cruise-control memory, creep function, hand & foot accelerator mode and the various driving modes.

Lindner LDrive Controls Lindner LDrive Hand

Motor

The Perkins Synchro with 3.6 litres capacity delivers 74,7 kW / 101 hp. It offers an enormous torque of 450 Nm at 1,500 rpm with a very steep torque increase of over 40%. These characteristics ensure powerful starting behaviour on slopes and when pulling. The particulate filter achieves exhaust level 5. This is comparable with the EURO 6 emissions class applicable to cars and trucks.

Perkins high-performance unit

  • more power
  • more torque
  • more capacity
  • lower consumption
  • less exhaust
  • less noise and vibration
  • easy to maintain

Transmission

TMT09 - ZF stepless transmission

TMT09 - ZF stepless transmission

The TMT09 is the first continuously variable transmission that was specially developed for a PTO output of 70 to 100 hp. Compact lightweight construction was particularly important. The transmission works particularly efficiently thanks to the largely mechanical power transmission with a low hydrostatic component. Driving is steplessly from -20 to +43 km / h with reduced engine speed. The 4-way rear PTO with start-up control works optionally at 430/540/750 / 1,000 rpm.

TMT09 - ZF stepless transmission

Hydraulics

BOSCH-Rexroth

BOSCH-Rexroth

The Lintrac 70 has a BOSCH-Rexroth high-performance hydraulic system with a separate oil supply and an output of 50 liters / min. The hydraulic system is each equipped with its own pump for the gearbox as well as the steering and working hydraulics. The Lintrac 70 has three double-acting control units with floating position and single-lever operation as standard. These load-sensing control units can be expanded by up to two control units. All hydraulic connections are provided with high quality hydraulic couplings.

The hydraulic components of the Lintrac come from Bosch-Rexroth in Germany. Thanks to particularly intensive development cooperation, the control panel for EHR and EFH as well as the coordination of the control units could be further improved. Hydraulics with device relief have never been so easy to operate.

BOSCH-Rexroth

Light

Light Light

The Lintrac is equipped with LED rear lights, daytime running lights and LED work lights. The light-emitting diodes are particularly energy-saving and last the life of the tractor with over 20,000 operating hours.

In addition, the Lintrac has powerful bi-halogen headlights for high and low beam. 

Intelligent light

Bright H7 halogen or LED work lights are available on request. Extremely clearly visible LED all-round lights and lightning bars are used for municipal use. In order to draw attention to special applications, LED flashing lights are used that fit perfectly into the TracLink roof shell - without any disadvantages for the overall height.

Dimensions

Dimensions, tires & color selection

Dimensions Lintrac 70
Wheelbase
2304 mm
Partial height (E)
1750 mm
Length (A) with standard tires
3955 mm
External width (B) with standard tires
2084 mm
Height (C) with standard tires
2453 mm

All information relates to the version with rear-axle steering - please refer to the brochure for dimensions without rear-axle steering.

Dimensions Lintrac 70
Rear tires Front tires Track (D) Outside width (B) height (C)
420/85-30 420/65-20 1516 2084 2453

Color RAL-Nr. 3001

Lintrac 70 Color RAL-Nr. 3001

Discover Lintrac 70
now

  • Find a dealer

    Contact one of our specialist dealers in your area for a non-binding offer.

    Find a dealer
  • Arrange a home visit

    Test Lintrac and Unitrac models at your own farm or at the local dealer.

    Arrange now
  • Lindner driver training

    Use the full potential of your vehicle and register for a Lindner driver training course.

    Register now
  • Rent a vehicle

    With trac.rent, renting vehicles from the Lindner fleet has never been easier

    Rent now
Demo vehicles & used machine Lintrac 70

Lintrac 70

  • Condition class Top demo vehicles
  • hp 101
  • Construction year 2024
  • Operating hours 50
instead of €116,880.00 €99,840.00
Details
Lintrac 70
Lindner Traktoren