Please select from the attachments listed below in the grey box. As soon as the appropriate Lindner tractor model has been found, it will be displayed below the grey selection box.
Hi i have a Lindner geotrac 60, and i need a tractor changes rubber! Where i can buy this, and delivery to Portugal? thanks!!
Unsa Lindner 520 SA mit selbstgebautem Frontgwicht und einer TAJFUN EGV 45 A ein super Gespann !! Sind sehr zufrieden mit Lindner
U5C1CF <a href="http://ncvulccrlypt.com/">ncvulccrlypt</a>, [url=http://xwvpaopjqqwg.com/]xwvpaopjqqwg[/url], [link=http://lafosgdecice.com/]lafosgdecice[/link], http://unbyqmdvsvqu.com/
This is the best Lindner we have, also we have a new 64 and an older 63. SUPER!!!!!!!
Da beste im Woid der traktor
New lindner geotrac 94 with new geotrac 64 with bigab in the netherlands noordwijk
Working with the new Lindner geo 94 with frontlader it is just perfect!!!!
Spritspartipp Nr. 1
Combining working processes!
If one can combine working processes, then travelling when empty and
lengthy turnaround times can be prevented (e.g., mowing with conditioning and
wide-spreading systems saves tedding). Savings in working processes is one of
the most effective measures for reducing fuel consumption (e.g., mulch
seeding).Jochen Kaiser Kundendienst
Spritspartipp Nr. 2
Driving with an appropriate engine speed!
Always use the relevant gear and economy power
take-off for tractors. Transporting tasks should be carried out with reduced
motor speeds.Ing. Hannes Ringler Technikabteilung
Spritspartipp Nr. 3
Select the correct tyre inflation pressure!
A sufficiently high tyre inflation pressure
for road travel reduces the rolling resistance. A low tyre inflation pressure
increases the contact area of the tyres when driving in fields. This thus
reduces the pressure on the ground, the requirement on pulling force and the
slippage.Paul Fuchs Kundendienstleitung
Spritspartipp Nr. 4
Reduced engine speed (40 km/h)!
High speed with lowered engine speed reduces the fuel consumption when
transporting goods. Note: Geotrac 104, 114 ep, 124 and 134 ep are available
with this option!Ing. Christian Mauracher Versuch/Entwicklung
Spritspartipp Nr. 5
Estimate the required tractor power!
One should ensure that the power corresponds to the
activities involved in operation concerned.Ing. Marco Thaler Kundendienst und Garantieabwicklung
Spritspartipp Nr. 6
Economical use of the air conditioning system!
The air conditioning compressor uses engine
power and fuel in the cooling mode. When the cab gets too hot, it is
recommended that the window and doors are opened for a short period to release
the heated air, before turning on the air conditioning. Keep the window and
doors closed in cooling mode and switch the ventilation system to circulation
mode. Turn off the air conditioning when the required internal temperature has
been achieved.Alois Kaufmann Kundendienst und Garantieabwicklung
Spritspartipp Nr. 7
Measuring the fuel consumption!
Constant monitoring of the consumption is the basis for implementing
savings´measures. Always use the fuel-saving logbook for tractors.Christian Moser Versuch und Entwicklung
Spritspartipp Nr. 8
Ensure optimum gearbox ratios!
The gearbox ratios should be set as low as possible to the speed
levels which the tractor is mainly used in.
Reference: Lindner tractors are equipped with
economy power take-off as standard!Ing. Christian Embacher Technikabteilung
Spritspartipp Nr. 9
maintenance intervals in the service manual should be adhered to when possible
in order to achieve the ideal fuel consumption.Ing. Stefan Reremoser Technischer Händler und Kundensupport
Spritspartipp Nr. 10
Adjusting the power rate on the device!
The adjusted engine power is a prerequisite for an
energy-efficient mode of working. The area to be covered should be increased by
enlarging the working width and not by increasing the driving speed.Josef Bischofer Technischer Konstrukteur, Elektronik
Spritspartipp Nr. 11
Correct ballast levels for the tractor!
The relevant high wheel load is a requirement for
efficient power transmission for heavy pulling work. The ballast weight should
be removed for lighter work.Gerhard Lechner Technik
Spritspartipp Nr. 12
Correctly select the devices and speed!
Do not work deeper than necessary when cultivating
(e.g., ploughing). Select the optimum processing intensity. Adjust the working
speed to the attachment (e.g. optimum travelling speed for combination seed
drills).Martin Radlingmaier Verkaufsberater Gebrauchtmaschinen
Spritspartipp Nr. 13
Tractor and equipment maintenance!
A cleaned radiator and air filter increases the efficiency of the
engine. Regularly maintained tools on the equipment reduce the power
requirement (e.g. sharpen cutting tools punctually or renew).Ing. Hannes Ringler Technikabteilung
Spritspartipp Nr. 14
Use the full working width!
Efficient use of the working width increases the surface area
performance. Suitably large swathes increase the throughput for self-loading
trailers, ball presses and forage harvester.Mag. Bartl Niedermuehlbichler Pro Team Händlerbetreuung
Spritspartipp Nr. 15
Ensure the ideal preparation time!
An ideal, dry ground prevents higher traction
requirements, slipping and the risk of ground compaction. The quality of the
work increases.Walter Klingler Ersatzteilabwicklung
Spritspartipp Nr. 16
Warming up the engine when standing still costs fuel.
The vehicle can also be driven
carefully at lower temperatures with average engine speeds, without having to
be warmed up.
Installation of an engine pre-heating device
also saves fuel consumption and allows the vehicle heater to respond quicker.Adi Moser Technischer Support und Ersatzteilabwicklung
Spritspartipp Nr. 17
Cleaning the grille surfaces!
In mowing mode, take care that the grille surfaces on the bonnet are
cleaned at regular intervals. Dandelion pollen, during the first cutting, can
cause a build-up of fungus on the cooler intake surfaces. The cooling
performance will decrease and the fuel consumption will increase. A clean
cooler will achieve an ideal cooling performance and save fuel.Alois Kaufmann Kundendienst und Garantieabwicklung
Spritspartipp Nr. 18
Visko Ventilation for predominantly use in winter.
If you are often just driving short distances in
winter, then you should choose a vehicle with a Visko ventilator. The
ventilator is only active when needed and thus requires less power. The engine
reaches its operating temperature more quickly.Christian Moser Versuch/Entwicklung