LINTRAC 90 for vineyards

Designed for Cultivation Agriculture. Well thought-out to the last detail.

With its minimum possible exterior width of 160 cm, Lintrac is especially suitable for plantations and vineyards. Especially in the 1.35 m or 1.5 m track, its manoeuvrability is incredible as a result of its steering rear axle. As a result of the easy to handle Ldrive, operation of the infinitely variable ZF transmission, driving is almost a secondary matter and the user can fully concentrate on add-on equipment. The high-performance working hydraulics with its 100 l displacement pump are especially efficient.

Cabin for vineyard Space saving cabin

The spring-mounted cabin is a comfortable workspace with a clear 360° view. The panorama comfort cabin provides the best view on all sides. Fatigue-free work comes about through a pleasant working climate, comfort seat with air suspension and logically placed controls. It is particularly important in dangerous situations to be able to find the switches and levers quickly so as to react correctly. The I.B.C. monitor is the central display. The comfortable I.B.C. remote control on the armrest puts the driver in the best seating position.

For this cabin design, a special fuel tank is used. The battery wanders from the right to the left side of the vehicle and is integrated within the tank so that is saves space.The cabin is designed without any components protruding to the side. Handles are mounted on the inside of the cabin. The side mirrors can be folded-in at the plantation. The mud guards are designed to be flush with the tyres.

Engine Perkins engine

102 HP with 420 Nm of torque, unbelievably economical and free of particles.

The Perkins 3.4 l Turbo-Diesel puts out 75 kW/102 HP. It develops an enormous torque of 420 Nm at 1400 rpm with a very steep torque slope of greater than 40%. These characteristics provide powerful starting on a slope and for traction tasks. Together with the TMT09 transmission, the engine can run at a reduced speed providing very low consumption figures. Emission level 3b is achieved with the particle filter.

Ldrive operation Get in and drive!

Get in and drive: Every driver is a professional with the simple control dial.

It is easy to drive the Lintrac: Start the engine, pick the direction, step on the gas and steer. Using the Ldrive control dial on the armrest makes for very efficient work. If the Ldrive is activated, rotating the dial sets the speed of travel in a dynamic and infinitely variable manner. Rapid selection buttons are provided for all-wheel, differential, cruise-control memory, creep function, hand & foot accelerator mode and the various driving modes.

4-wheel steering Unachieved manoeuvrability

he first tractor with a steering rear axle provides previously unachieved manoeuvrability.

The Lintrac is the first standard tractor with a steering rear axle. During development, Lindner was able to build on decades of experience with 4-wheel steering systems in highland agriculture and municipal use with the Unitrac Transporter. Extremely stable steering heads made of a special alloy are used in this system. Upon request, the rear axle can rotate up to 20° and this provides the Lintrac with manoeuvrability previously unheard of for tractors.

Cockpit Übersichtlich organisiert

The most important driving functions are grouped together on the Ldrive controller: Function keys for Crawler mode, cruise control and foot throttle mode are at the front. The keys behind them activate all-wheel drive and the differential.
Besides the cab suspension, the driver's seat with low-frequency air suspension an the padded passenger's seat ensure comfort when driving. The side storage compartment is cooled by the air conditioning system as well. With cup holders, a cradle for a mobile phone and the compartment on the seat, there is a place for everything.

Continuously variable transmission

Light, dynamic and particularly efficient: continuously variable driving with the TMT09 from ZF.

The TMT09 is the first continuously variable transmission specially developed for a take-off power of about 90 HP. Compact lightweight design was particularly important here. The transmission is particularly efficient due to the power transmission that is mechanical for the most part with a small hydrostatic proportion. Driving is infinitely variable from -20 to +43 km/h at a reduced engine speed. The 4-point rear power take-off with start control operates at 430/540/750/1000 rpm as desired.

Intelligent hydraulics for wineyard

The high-performance power hydraulics from BOSCH supplies 88 l/min with the variable displacement pump. The Lintrac operates with an axial piston pump that regulates the hydraulic power from 4 to 88 l/min on an infinitely variable basis. The exact oil volume needed is just what is provided. This eliminates power losses. Up to 5 EHS control units with volume setting are possible. These operate on a proportional basis and are particularly sensitive. As with all Lindner vehicles, the Lintrac has a separate oil supply for the power hydraulics/steering and the transmission. 

To ensure that the high-performance hydraulic system is kept at an optimized operating temperature at all times, an oil cooling unit with an electric fan is installed, which is coordinated to optimally match the 100 l displacement pump. The entire hydraulic system can be comfortably operated with a joystick with 3 microswitches and a toggle switch on the side console. Including rear lifting and side struts.

Light

The Lintrac is equipped with LED reversing and daytime running lights. The LEDs are very economical, and with a service life of more than 20,000 hours will last as long as the tractor. In addition, the Lintrac is equipped with extremely bright bi-halogen headlights for main and dipped beams. They are switched on and off automatically according to daylight conditions. The “coming-home function” continues to light the street for a few seconds after the engine has been switched off. Upon request, the vehicle may be equipped with very bright H7-halogen, xenon, or LED working lights. For municipal operations, extremely high visibility LED warning beacons and flashing light strips are used.

Abmessung & Bereifung

Zul. Gesamtgewicht: 6400 kg, Max. Achslast hinten: 3800 kg, Max. Achslast vorne: 3000 kg, Radstand: 2264 mm, Teilhöhe: 1702 mm
Rear tires Front tires Max. height (A) Max. width (B) Height (C) Gauge (D)
13,6 - R36 300/70 - R20 3487 mm 1716 mm 2427 mm 1370 mm
13,6 - R36 280/85 - R24 3564 mm 1910 mm 2427 mm 1550 mm
480/70 - R30 375/70 - R20 3518 mm 2209 mm 2409 mm 1710 mm

Multimedia

1/2

Sizes, weights & colours

Wheelbase (D): 2264 mm; Segment height (E): 1702mm; Max. permissible gross weight: 6.400 kg; Max. axle weight rear: 3.000 kg; Max. axle weight front: 3.800 kg
Rear tires Front tires Max. height (A) Max. width (B) Height (C) Gauge (D)
13,6 - R36 300/70 - R20 3487 mm 1720 mm 2427 mm 1365 mm
13,6 - R36 280/85 - R24 3564 mm 1860 mm 2397 mm 1500 mm
480/70 - R80 375/70 - R20 3518 mm 1894 mm 2409 mm 1396 mm

Downloads

Used equipment

Lintrac 90

Condition class: 2

Year of construction: 2016

HP: 102

Hours of operation: 550

89.800,- €

Details